Switching Through Port Indicator Display Modes - Yamaha SWX2320-16MT User Manual

2.7. Switching through port indicator display modes

When an error occurs, the product switches to STATUS mode; and after the product is restored from
error status, the product returns to default LED mode automatically. The product switches to STATUS
mode automatically. You cannot switch manually to STATUS mode.
See the tables below for how modes are switched.
For default LED mode: LINK/ACT mode
Mode name Switching conditions
LINK/ACT Normal
STATUS Error occurred (automatic
switching to LINK/ACT mode to
restore)
For default LED mode: OFF mode
Mode name Switching conditions
OFF Normal
STATUS Error occurred (automatic
switching to OFF mode to
restore)
Memo

• The factory default default LED mode is set to LINK/ACT mode.
• Use the "show led-mode" command to check the default LED mode and the
display mode that is currently displayed.
Explanation
Displays the link status using the left indicators
on the LAN/SFP+ ports, and the connection speed
on the right indicators.
↑ ↓
Displays the LAN/SFP+ port error status.
Explanation
The indicators on the LAN/SFP+ ports and the
stack ID display indicator goes dark.
↑ ↓
Displays the LAN/SFP+ port error status.
L2 SWITCH SWX2320-16MT User Guide | 11
2. Controls and connectors