Table of Contents
Advertisement
2. Controls and connectors
2.6.2. STATUS mode
This mode shows the error status of the LAN ports or SFP+ ports.
When one of the following errors is detected, the product switches to STATUS mode (mandatory) and
the port's left indicator flashes orange.
• Loop detection
• SFP light reception level error detection
LAN ports
Left indicator
Unlit
Flashing (orange)
SFP+ ports
Left indicator
Unlit
Flashing (orange)
See "Technical data" for this product for details.
Memo
• You can check the cause of the error using the "show error port-led" command.
• When all errors have been resolved, the product automatically switches to the
default LED mode.
2.6.3. OFF mode
The indicators on the LAN and SFP+ ports, as well as the stack ID display indicator turns off.
10 | L2 SWITCH SWX2320-16MT User Guide
Right indicator
Unlit
Unlit
Status
Normal
A loop or SFP light reception level error was detected. Or, SFP light
reception level error was detected.
Status
Normal
Loop detected, then the port was blocked or shut down.
Advertisement
Table of Contents
