Set Up The Hyperterminal With Usb To Serial Port - Cables to Go 28652 User Manual

6. Windows will ask you which port the printer will be used, choose USB001:
(Virtual printer port to USB). (Ref. Fig.10)

2.4 Set up the HyperTerminal with USB to serial port

1. Make sure that HyperTerminal is installed in your system. If not, please go to
Start, Settings, and Control Panel. Double click Add/Remove Programs,
choose Windows Setup page, Communications, click Details button and
enable HyperTerminal to install the program to your Windows system.
2. Go to Start, Settings, Control Panel, double click System, and click on
Device Manager. Check which COM port is located by USB to serial port.
(Ref. Fig.11)
Fig.10
Fig.11
29