Cables to Go 27386 User Manual

Port Authority2™ USB 2.0 PCI Adapter Card 6-Port
USB Port Features
Compliant with USB specification Revision 2.0
- Compliant with EHCI specification Revision 1.0
- Compliant with OHCI specification Revision 1.0
- PCI multi-function device consists of two OHCI Host controllers for full/low-speed signaling and ECHI Host
Controller core for high-speed signaling
- 2 downstream facing ports in the root hub with integrated physical layer transceivers shared by OHCI and
EHCI Host controllers
- Supports PCI-Bus Power Management interface specification release 1.1
- Legacy support for all downstream facing ports
System Requirements
• PCI-enabled computer system
• CD-ROM drive (to install driver software, if needed)
Package Contents
This PCI USB Card package includes the following:
• PCI USB Card
• CD Driver
• Manual
Software:
• Windows® 98SE/ME/2000/XP & MAC
Configuration
．The PCI USB Card
This section provides information on how to install drivers for the listed operating systems.
Windows® 98SE/ME Driver Installation
1. Run the driver installer program. (D:\Drivers\Windows\Driver.exe) – substitute D: for the letter of your CD-ROM.
2. This program will copy driver files onto your windows system. Once completed, restart your computer.
3. After system reboot, windows will find the new hardware "ALI PCI to USB Enhanced Host Controller" and
install the driver.
4. Restart the computer again to complete the installation.
User's Manual
The ports are labeled as
'UJ1','UJ2', for the USB
connectors, These ports are
where you physically
connect your hardware
(mouse, keyboard, etc).