Warranty; Limited Lifetime Warranty; What Is Covered; Pre-Installation - HAMPTON BAY 7136-01 Use And Care Manual

Humidity sensing ventilation fan

Table of Contents

Available languages

Warranty

LIMITED LIFETIME WARRANTY

WHAT IS COVERED

If this product fails due to a defect in materials or workmanship at any time during the first FIVE years of ownership, the manufacturer will replace it free

of charge, postage-paid at their option. This warranty does not cover products that have been abused, altered, damaged, misused, cut or worn. This

warranty does not cover use in commercial applications. Use only manufacturer-supplied genuine warranty repair replacement parts to repair this fan. Use of

non-genuine repair parts will void your warranty. The manufacturer DISCLAIMS all other implied or express warranties including all warranties of merchant-

ability and/or fitness for a particular purpose. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and

limitations may not apply. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

This warranty is limited to the replacement of defective parts only. Labor charges and/or damage incurred during installation, repair, replacement as well

as incidental and consequential damages connected with the above are excluded. Any damage to this product as a result of neglect, misuse, accident,

improper installation or use other than the purpose SHALL VOID THIS WARRANTY. Shipping costs for return product as part of a claim on the warranty

must be paid for by the customer.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

Pre-installation

PLANNING INSTALLATION

Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents. If

any part is missing or damaged, do not attempt to assemble the product.

WARNING: Turn off electricity at breaker box before beginning

installation.

Carefully remove the unit from the carton.

Check area above installation location to be sure that wiring can run to the planned location and that duct work can be run and the area is sufficient

for proper ventilation.

Inspect duct work and wiring before proceeding with installation.

Before installation, provide inspection and future maintenance access at a location that will not interfere with installation work.

You may need the help of a second person to install this fan; one person on the attic side and one on the room side.

NOTE: Installation may vary depending on how the previous bath fan

was installed. Supplies necessary for the installation of your bath fan are

not all included. However, most are available at your local home

improvement or hardware store.

TOOLS REQUIRED (not included)

Claw

hammer

Phillips head