At+Find; At+Rssi; At+Name - LM Technologies LM048 At Command Manual

2.8.12.1 AT+ADDR?<cr>
2.8.12.1.1 Response
<cr,lf><XXXX-XX-XXXX>< command_response> if the command is successful. Here,
XXXX-XX-XXXX is the Bluetooth address of local device.

2.8.13 AT+FIND

This command is used to search for any Bluetooth device in the neighborhood within one minute. If
any device is found, its name and address will be listed. Maximum limit of devices searched is 8. The
search ends with a message "Inquiry ends. xx device(s) found." This command is available only when
the adaptor is in the manual master role.
2.8.13.1 AT+FIND?<cr>
2.8.13.1.1 Response
<command_response><cr,lf>Inquiry Results:<cr,lf>
<Sr No><DeviceName><XXXX-XX-XXXX><cr,lf> for every device found. Here, XXXX-
XX-XXXX is the Bluetooth address of local device. e.g. "1 Serial Adapter
001E-3A-2CDAB7"
2.8.13.2 AT+FIND-<cr>
This command will cancel the ongoing search operation. If the search is finished (1 minute
timeout / max devices found), then the command will return error.
2.8.13.2.1 Response
<cr,lf> Inquiry cancelled<command_response>

2.8.14 AT+RSSI

Inquire RSSI value for current bluetooth connection. This command is available in online command
mode when the device is in connected state.
2.8.14.1 AT+RSSI<cr>
2.8.14.1.1 Response
<cr,lf><RSSI><command_response>
<RSSI> - can be STRONG/AVERAGE/WEAK depending on the received radio signal
strength.

2.8.15 AT+NAME

This command is used to specify a name for the adaptor. You can specify a friendly name using 0 to
9, A to Z, a to z, space and –, which are all valid characters. Note that "first space or -, last space or –
isn't permitted". The default name is "Serial Adapter". The current device name can be retrieved by
using the sending this command in query format.
2.8.15.1 AT+NAME=XXXX<cr>
Where the parameter "XXXX" is a character string with a maximal length of 16.
2.8.15.1.1 Response
<command_response>
@2010 LM- Technologies Ltd
AT Command Manual
www.lm-technologies.com
v1.2
Page 11 of 16