Clarion CZ215E Owner's Manual page 13

System Setup
display, then turn [ROTARY] knob to
choose one of the paired devices.
3. Press [ROTARY] knob.
4. Turn [ROTARY] knob to select
"CANCEL" or "ARE U SURE", and
press [ROTARY] knob.
CANCEL: cancel deleting the paired
device.
ARE U SURE: confirm to delete the
paired device.
Notes:
• Deleted paired device will not automatically
rearrange in the paired device list.
• After deleting the device, the phone book
and the call history records will be deleted
too.
Disconnect Device
This option is used to disconnect the
currently connected device.
1. Select "BT DISCON" in system setup
items, and press [ROTARY] knob.
2. Press and turn the [ROTARY] knob to
select "ARE U SURE" or "CANCEL".
ARE U SURE: confirm to disconnect
the paired device.
CANCEL: cancel disconnecting the
paired device.
3. Press the [ROTARY] knob to confirm.
Auto Answer
This is a setting to determine whether
any incoming call will be automatically or
manually answered.
∗ The factory default setting is "OFF".
1. Select "A-ANSWER" in system setup
items.
2. Turn [ROTARY] knob to select "ON" or
"OFF".
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer
the call.
Auto Connect
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗ The factory default setting is "ON".
1. Select "A-CONNECT" in system setup
items.
2. Turn [ROTARY] knob to select "ON" or
"OFF".
Priority for Phonebook
Download
Setting the priority for the phonebook
download automatically while pairing.
∗ The factory default setting is "DEVICE".
1. Select "TEL MEMORY" in system setup
items.
2. Turn [ROTARY] knob to select the
setting: DEVICE/SIM.
DEVICE: Phonebook download from
device firstly.
SIM: Phonebook download from SIM
card firstly.
Pin Code Setting
This pin code is used during pairing. A
maximum of 10 digits can be changed
through this unit.
∗ The factory default pass key is "1234".
1. Select "PIN CODE" in system setup
items.
2. Press [ROTARY] knob.
3. Press [x] or [v] button to move the
cursor.
4. Turn [ROTARY] knob to select the
desired digits.
5. Long press [ROTARY] knob to store in
memory.
Performing Memory Reset
Reset various settings in the memory.
Note:
• The settings will remain in the memory
even if you turn the power off .
1. Select "RESET" in system setup items,
and press [ROTARY] knob.
2. Turn [ROTARY] knob to select
"CANCLE" or "ARE U SURE", and
press [ROTARY] knob.
CANCEL: cancel resetting
ARE U SURE: "CLEARED" appears
in the display, and the memory will be
cleared.
CZ215E/CZ315E
13