Refreshdata; Refreshdataau; State2Id - CSSN ScanShell 2000 Description

10350 Santa Monica Blvd. Suite 285, Los Angeles, CA 90025
Phone: 310-691-8920, 310-788-9840, Fax: 419-735 -2419
1.1.27.

RefreshData

Format
RefreshData () As Long
Return Value
If the function returns non-zero value, the data was retrieved successfully.
If the function returns zero value, the data was retrieved un-successfully.
Remarks
This function is used to load library properties with the recently detected data. This function should
normally be called after the execution of ProcState function.
1.1.28.

RefreshDataAu

Type
Function.
Format
RefreshDataAu () As Long
Return Value
If the function returns non-zero value, the data was retrieved successfully.
If the function returns zero value, the data was retrieved un-successfully.
Remarks
This function is identical to RefreashData() function.
1.1.29.

State2Id

Format
(StateName
State2Id
Parameters
StateName
[in]
Return Value
StateName
The state ID if the
ID_ERR_NO_MATCH – if the string contain unrecognizable state name.
Remarks
This helper fun ction is used to convert a state name (string) to its equivalent id value. For example,
passing StateName loaded with the string "California" will return the value 4. The function converts
the string to the id even if the state is not supported by the library.
Card Scanning Solutions
As String) As Long
– A string that holds the state name.
is recognizable state name.
26