Getfirstcountry; Getfirststatebycountry - CSSN ScanShell 2000 Description

10350 Santa Monica Blvd. Suite 285, Los Angeles, CA 90025
Phone: 310-691-8920, 310-788-9840, Fax: 419-735 -2419
Remarks
Use this function to extract the image rectangle of the person's face from the source id image. The
source image can be one of two:
Internal image : The last scanned image (stored in the internal memory). This image will be used only
SourceFileName
if the string is empty
External image file: The full file name is given in
used as the source image it must be a 24 bit image (true color) and have a resolution of 300dpi. The
source and file destination can be one of the following formats: BMP, TIFF, JPG, PCX, TGA, PNG,
PSD.
To set the image format use the proper file extension (xxx.bmp for bitmap, xxx.jpg for Jpeg, etc.)
1.1.22.

GetFirstCountry

Format
GetFirstCountry( ) As Long
Return value
The constant value of the first country in the countries list.
Remarks
Use this function to get the first country in the countries list. Combining this
function with the function GetNextCountry allow you to obtain the constant
values of all supported countries. The countries constant values in the Region
ARE NOT always consecutive and should be obtained using the function
GetNextCountry.
1.1.23.

GetFirstStateByCountry

Format
GetFirstStateByCountry
Parameters
country
[in] – Constant value of the country
Return
ID_ERR_NO_MATCH: Bad country constant.
Otherwise, the function return the constant value of the first state in the country.
Remarks
Use this function to retrieve the first state constant in the country.
Card Scanning Solutions
SourceFileName
(country
As Integer) As Long
parameter. If an external file is
23