Little Giant LG-SCSA Series Owner's Manual page 8

MAINTENANCE
Cleaning Impeller and Volute
Periodic cleaning of the pump parts will prolong the life and
efficiency of the pump.
1. Remove the 5 bolts and 5 washers (1, 2) that secure the base (4)
to the volute (3), then separate the base (4) from the volute (3).
s
WARNING
!
2.
housing cover. Warranty is void if the motor housing cover,
impeller or seals have been removed.
3. Remove all debris (gravel, sand, floating debris, etc.)
from the sump basin.
4. Clean the impeller (5) and the volute passage (6).
Do not use strong solvents.
s
CAUTION
!
a.
Removal of the impeller requires special tools and is to be
done only by an authorized service center.
5. Be sure the impeller turns freely after cleaning.
6. Place the rubber gasket (7) over the base (4).
7. Attach the base (4) to the volute (3) and secure it with
the 5 bolts and 5 washers (1, 2).
8
Do not remove the motor
Do not remove the impeller.
REPLACEMENT PARTS
Part No.
110970301
3
5
6
7
4
2
1
A-N661
Description Item No.
Float Assembly
8
8