Sony DK812FR Instruction Manual page 2

[For U.S.A. and Canada]
THIS CLASS A DIGITAL DEVICE COMPLIES WITH
PART15 OF THE FCC RULES AND THE CANADIAN
I C E S - 0 0 3 . O P E R A T I O N I S S U B J E C T T O T H E
FOLLOWING TWO CONDITIONS.
(1) T H I S D E V I C E M A Y N O T C A U S E H A R M F U L
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDERSIGNED OPERATION.
CET APPAREIL NUMERIQUE DE LA CLASSE A EST
CONFORME A LA NORME NMB-003 DU CANADA.
[ For EU and EFTA countries ]
CE Notice
Marking by the symbol CE indicates compliance with the
EMC directive of the European Community. This marking
shows conformity to the following technical standards.
EN 55011 Group 1 Class A / 98 :
"Limits and methods of measurement of radio
disturbance characteristics of industrial, scientific and
medical (ISM) radio-frequency equipment"
EN 61000-6-2 / 99 :
"Electromagnetic compatibility (EMC) - Part 6-2 : Generic
standards - Immunity for industrial environments"
For DC power-driven products to meet EN 61000-6-2 / 99, the
following operational conditions must be satisfied.
1. Input and output signal cable length : 30 m or less
2. Cable length for input power source : 10 m or less
3. Scale cable length :
Note
When using the same cable for output signal and input
power source, the cable must not be longer than 10 m.
For AC power-driven products to meet EN 61000-6-2 / 99, the
following operational conditions must be satisfied.
1. Input and output signal cable length : 30 m or less
2. Scale cable length :
警告
本装置を機械指令 (EN 60204-1) の適合を受ける機器にご使
用の場合は、その規格に適合するように方策を講じてか
ら、ご使用ください。
Warning
When using this device with equipment governed by
Machine Directives EN 60204-1, measures should be taken
to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen verwendet wird,
die von den Maschinenrichtlinien EN 60204-1 geregelt
werden, müssen Maßnahmen ergriffen werden, um eine
Übereinstimmung mit diesen Normen zu gewährleisten.
30 m or less
30 m or less