Mitsubishi Electric PLA-A.EA7 Operation Manual page 5

2. Parts Na es
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
2 3 4 5 6
6
7
8
Room
9
0
Set temp.
Cool
1
83
1
Mode Temp.
@
1 Operation
o e
Indoor unit operation mode appears here.
2 Preset te perature
Preset temperature appears here.
3 Cloc
See the Installation Manual.
Current time appears here.
4 Fan spee
Fan speed setting appears here.
5 utton function gui e
Functions of the corresponding buttons appear here.
6
Appears when the ON/OFF operation is centrally controlled.
7
Appears when the operation mode is centrally controlled.
8
Appears when the preset temperature is centrally controlled.
9
0
1 Roo
te perature See the Installation Manual.
Current room temperature appears here.
2
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
8 9
3
Fri
)
83
!
F
7
4
F
Fan
2
5
<Basic mode>
Cool Set temp.
1
83
Mode Temp.
3
Appears when the On/Off timer, Night setback, or Auto-off timer func-
tion is enabled.
appears when the timer is disabled by the centralized control
system.
4
Appears when the Weekly timer is enabled.
5
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
6
Appears while the outdoor units are operated in the silent mode.
7
Appears when the built-in thermistor on the remote controller is acti-
vated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
8
Appears when the units are operated in the energy-save mode with 3D
i-see Sensor.
9
Indicates the vane setting.
)
Indicates the louver setting.
(This indication is not available for this model.)
!
Indicates the ventilation setting.
@
Appears when the preset temperature range is restricted.
2
3
Fri
4
F
Fan
5
5