Table of Contents
Advertisement
Off
Flashing blue
Power light
Status light
Off
Flashing blue
Off
Orange
Lamp light
Temp light
Orange
Off
47
Projector has overheated and
turned off; leave it turned off to
cool down for about five minutes,
then do the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug
the projector and contact Epson
for help
Status and solution
Lamp or lamp cover has a problem
• Check to see if the lamp is
burned out, broken, or installed
incorrectly; reseat or replace the
lamp as necessary
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug
the projector and contact Epson
for help
• Check that the lamp cover is
installed correctly
Advertisement
Table of Contents
