Connecting External Output Devices - Epson PowerLite 107 User Manual

the
Note: If you connected your video source to the projector using an HDMI or MHL cable, the audio
signal is transferred with the video signal; you do not need an additional cable for sound.
1.
2.

Connecting External Output Devices

Connecting to an External Computer Monitor
If you connected a computer to the projector's Computer port, you can also connect an external
monitor to the projector. This lets you see your presentation on the external monitor even when the
projected image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Always On as the A/V Output setting in the projector's Extended menu.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1.
2.
3.
audio cable to your video source's audio-out ports.
Connect the other end of the cable to the projector's Audio port or ports.
Make sure your computer is connected to the projector's Computer port. If there are
two computer ports, make sure you use the Computer1 port.
external monitor's cable to your projector's Monitor Out port.
15