Scanning Without The Trainer - WizCom Technologies Readingpen Basic Edition K-12 Quick Start Manual

Quick Start Readingpen® Basic Edition K-12 (ver. 1.0)
3. The text should be positioned at the center of the
opening of the trainer.
4. Glide ('scan') the Pen from right to left in a straight
line over the text. The area you scan should start ½
an inch before the text, and end ½ an inch after it.
Make sure that the text always appears between the
2 arrows on the trainer, as if being "fed" into the
trainer.

Scanning without the Trainer

Once you get accustomed to scanning, you can also
scan without the trainer:
1. You can scan from right to left or from left to right.
2. Place the Pen rollers on the page, approx. ½ an inch
before the beginning of the text, and roll the Pen over
the text until ½ an inch after the text.
3. Make sure that the white guidelines at the Pen's tip
pass exactly over the middle of the scanned text.
4. Maintain the 90˚ Pen angle you learned when
scanning with the trainer.
11