8e6 Technologies 3 User Manual page 88

C U S : C
LIENT SER ECTION
88
1 - W
HAPTER ORKSTATION
• To set up automatic reporting, specify the following
criteria:
a. Username - enter the alphanumeric, case sensitive
username of the user at this workstation.
b. Password - enter the alphanumeric, case sensitive
password of the user.
c. Interval - specify the interval of time when reports will
be generated (every 15 or 30 minutes; every hour; or
every 2, 4, 12, or 24 hours).
d. Click the Next button.
• To bypass this option, click the Skip button.
NOTE: 8e6 recommends that you select the automatic report
option and set up reports to run each hour.
After clicking either the Next or Skip button in the Automatic
Report Setup window, the Wizard indicates that the instal-
lation is complete:
Fig. 2:1-18 Installation complete
C
ONFIGURATION
8 6 T , E
E ECHNOLOGIES NTERPRISE
R 3.0 U ' G
EPORTER SER S UIDE