Table of Contents
Advertisement
EN - ENGLISH (Original instructions)
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new machine. This
manual has been prepared for the owner and operators of a PROMAC grinder to promote safety
during installation, operation and maintenance procedures. Please read and understand the
information contained in these operating instructions and the accompanying documents. To obtain
maximum life and efficiency from your machine, and to use the machine safely, read this manual
thoroughly and follow instructions carefully.
...Table of Contents
1. Declaration of conformity
On our own responsibility we hereby declare
that this product complies with the regulations*
listed on page2.
Designed in consideration with the standards**.
2. Warranty
The Tool France guarantees that the supplied
product is free from material defects and
manufacturing faults.
This warranty does not cover any defects which
are caused, either directly or indirectly, by
incorrect use, carelessness, accidental damage,
repair, inadequate maintenance or cleaning and
normal wear and tear.
Any warranty details (i.e. warranty period) can
be found in the General Terms and Conditions
(GTC) that are integral part of the contract.
These GTC can be viewed at the website of
your dealer or sent to you upon request.
Tool France reserves the right to make changes
to the product and accessories at any time.
3. Safety
3.1 Authorized use
This grinder is designed for grinder metal and a
similar
grinder
materials is not permitted and may be carried
out in specific cases only after consulting with
the manufacturer.
The proper use also includes compliance with
the operating and maintenance instructions
given in this manual.
The machine must be operated only by persons
familiar with its operation and maintenance and
who are familiar with its hazards.
The required minimum age must be observed.
The machine must only be used in a technically
perfect condition.
When working on the machine, all safety
mechanisms and covers must be mounted.
In addition to the safety requirements contained
in these operating instructions and your
country's applicable regulations, you should
observe the generally recognized technical
rules concerning the operation of metalworking
machines.
Any other use exceeds authorization.
In the event of unauthorized use of the machine,
the manufacturer renounces all liability and the
responsibility is transferred exclusively to the
operator.
5
only.
Machining
of
other
Advertisement
Table of Contents
