Timex W223-EU2 Manual page 9

ENGLISH
(Analog/Digital Models, Cont'd.)
FOLLOWED BY
WILL
THE CURRENT
APPEAR
ALARM SETTING
FOR 3
TIME AND TIME
SECONDS
ZONE.
TO SET DAILY ALARM
1) PRESS pusher "A" to bring up DAILY ALARM
display: "ALARM" will appear for 3 seconds
followed by the current alarm setting time and
time zone. The ALARM mode symbol "AL" and the
applicable time zone symbol "T1" or T2" alternate
to give complete information.
2) PRESS pusher "D" to let time zone flash.
3) PRESS pusher "C" to select time zone.
4) PRESS pusher "A" to let hour flash.
5) PRESS pusher "C" to advance hour.
6) PRESS pusher "A" and "C" as above to adjust
tens of minutes and minute.
7) PRESS pusher "D" to complete setting.
8) Alarm is automatically activated after setting
S is displayed.
10
ENGLISH
(Analog/Digital Models, Cont'd.)
NOTE:
• When the alarm sounds, it will beep for 20 seconds.
• To stop the alarm beep, PRESS any pusher.
• PRESS and HOLD pusher "C" for 2 seconds in
setting mode, to activate fast advance.
11