Mute Mode; Checking Call Duration - Sagem MC 300 Series Manual

2 X Place on hold the multi-
conference calls except for the
current call order number X
(private call).
3 Add a call holding (or multi-
conference calls) to the current
call (or to the multi-conference).
Tel N° Place on hold the current call (or
the multi-conference calls) and
call another telephone number.
Note: However, it is preferable to
place the call on hold then dial,
then call; this guarantees
comfort and confidentiality (does
not allow the call holding to hear
the dialling tones whatever the
configuration of the phone).
End all calls except for a
possible call waiting.
MC300X_GB-07.p65
33

7.9 Mute mode

During the call, you can select the mute
mode which enables you to disable the
microphone.
Select the mute mode by pressing the
key, then OK. To enable the microphone,
press any key.
or
Hold down the

7.10 Checking call duration

CALL SERVICES/DURATION AND
COST/DURATION/COUNTERS
This menu allows you to check the
duration of the last call. To check
the cumulated duration of all calls
since the last counter reset, press
the scrolling arrows.
33
key.
Warning
This data is purely
indicative and
cannot constitute a
basis of proof: the
network metering
criteria may be quite
different (indivisible
minutes etc.).
7. Call services
27/04/2001, 10:31