Self Climat DN 50 Fitting And Operating Instructions page 12

THIS MANUAL SHOULD BE READ CAREFULLY BY ALL PERSONS WHO ARE OR WILL BE RESPONSIBLE FOR THE
INSTALLATION OR OPERATION OF THE PRODUCT.
FOR SAFETY REASONS, THIS DEVICE SHOULD BE USED BY PERSONNEL AUTHORISED TO WORK ON EQUIPMENT
FOR USE IN EXPLOSIVE ATMOSPEHERES.
PLEASE READ AND DIGEST THIS MANUAL BEFORE USING THE APPLIANCE.
I Marking
II General specifications
III Operating instructions
3.1
3.2
3.3
IV Fitting
4.1
4.2
4.3
V
Special conditions
VI
Optional accessories
VII
Technical data
VIII Standards and approvals
On receipt of the delivery, check that the packaging is original and that the equipment is in good condition.
The supply should comprise:
- The Self Climat overfill prevention device
- The manufacturer's plate and two nails in a sachet
- The instruction manual
- The declaration of conformity EU
12/40
Safety instructions
Starting up
Operation
Installation of the overfill prevention device
Maintenance and troubleshooting
Dismantling
WARNING !
CAUTION !
CONTENTS
SUPPLIES
13
13
14
14
14
14
16
16
17
17
17
17
19
20