Removing And Reinstalling The Main Parts - Sharp CD-G10000 Service Manual

CD-G10000/CP-G10000S

[2] Removing and reinstalling the main parts

1. TAPE MECHANISM SECTION
Perform steps 1 to 5 and 6 of the disassembly method to remove the
tape mechanism.
1.1. How to remove the record/playback and erase heads
(TAPE 2) (See Fig. 1)
1. When you remove the screws (A1) x 2 pcs., the recording/playback
head and three-dimensional head of the erasing head can be
removed.
Erase Head
(A1)x2
M2x9mm
1.2. How to remove the playback head (TAPE 1)(See Fig. 2)
1. When you remove the screws (B1) x 2 pcs., the playback head can
be removed.
(B1)x2
M2x9mm
1.3. How to remove the pinch roller (TAPE 1/2) (See Fig. 3)
1. Carefully bend the pinch roller pawl in the direction of the arrow
<A>, and remove the pinch roller (C1) x 1 pc., in the direction of the
arrow <B>.
NOTE: When installing the pinch roller, pay attention to the spring
mounting position.
TAPE 2
Clutch Ass'y
Record/Playback
Head
Figure 1
TAPE 1
Clutch Ass'y
Playback
Head
Figure 2
Pinch Roller
(C1)x1
1.4. How to remove the belt (TAPE 2) (See Fig. 4)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
1.5. How to remove the belt (TAPE 1) (See Fig. 4)
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
TAPE 2
Main Belt
(D1)x1
1.6. How to remove the motor (See Fig. 5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
(F1)x2
M2.6x5mm
3 – 5
Pinch
Roller
Pawl
<A>
Pull
<B>
Figure 3
Tape
Motor
Tape
Motor
FF/REW
Belt TAPE 1
TAPE 2
(D2)x1 Main Belt
Main Belt
(E1)x1
(D1)x1
TAPE 1
FF/REW
Belt
(E2)x1
Main Belt
(E1)x1
Figure 4
Tape
Motor
Clutch Ass'y
Figure 5