Download Print this page

Bushnell Elite 62-1050 User Manual page 6

Bushnell elite 62-1050: user guide

Advertisement

WATERPROOF / FOGPROOF
Your Bushnell Elite binocular has been designed and built utilizing the latest waterproof and fogproof technology.
Elite binoculars are O-ring sealed for complete moisture protection. Fogproof protection is achieved from dry nitrogen
purging that removes all internal moisture.
EYECUP ADJUSTMENT: (Fig. 3 and 4)
Your Bushnell Elite binocular is fitted with twist-up eyecups designed for your comfort and to exclude extraneous light.
For users without eyeglasses, while pulling the eyecups up, rotate the eyecups slightly counter-clockwise until they lock
into the fully "up" position (fig. 3). If you wear glasses, make sure the eyecups are in the down position- this will bring
your eyes closer to the binocular lens, allowing you to see the full field of view. To lower the eyecups from the full "up"
position, pull them up slightly, then rotate them clockwise while pushing down (fig. 4). It is also possible to set the
eyecups to positions "in between" fully up and fully down, which may suit some individuals better.
NECKSTRAP ATTACHMENT : (Fig. 5 and 6)
To attach the neckstrap, first align the strap with the plastic fastener positioned as shown in Figure 5. Push the
fastener into the socket, then rotate it counter clockwise until the strap is parallel with the binocular tubes as shown
in Figure 6. You will feel the fastener latch into place as you rotate it. To remove the strap, return the fastener to the
original position ( Figure 5), and pull it straight up out of the socket.
Fig. 5
Fig. 6
4
Elite Binoc 1LIM.indd 6
11/23/04 8:52:48 AM

Advertisement

loading

This manual is also suitable for:

62-0726Elite binoculars 10x42Elite binoculars 8x42Elite