Type Designation - JUMO LOGOSCREEN nt Installation Instructions Manual

2 Identifying the instrument version

2.2 Type designation

Basic type
Paperless recorder with Ethernet, USB and RS232/RS485 interfaces and
706581/
RS232 interface (to connect a barcode reader) and one relay
Basic type extensions
Software
0 No software package
With software package (setup program incl. USB cable, PC Evaluation software PCA3000,
1
PCA Communications software PCC)
Language for instrument texts
8 Factory setting (English/German)
9 Set to customer specification
1 2 3 Module slots
0
2
3
706581/ -
706581/ 1 8 - 3 2 1 -
1
This extra code is available in combination with supply voltage 100—240V AC, not with low supply voltage.
UL and ATEX approvals not applicable. The protection type in the carrying case corresponds to IP20, outside IP20D.
2
List extra codes in sequence, separated by commas.
12
Slot 1 (bottom)
not used
3 analog inputs and 8 binary inputs/outputs
6 analog inputs
Slot 2 (middle)
0 not used
2 3 analog inputs and 8 binary inputs/outputs
3 6 analog inputs
Slot 3 (top)
0 not used
1 6 relay outputs
2 3 analog inputs and 8 binary inputs/outputs
3 6 analog inputs
Supply
33 100 - 240V AC +10/-15%, 48 - 63Hz
25 20 - 30V AC/DC, 48 - 63Hz
020
021
260
267
350
444
- /
33 / 020
Extra codes
Lithium battery for memory buffering (ex-factory)
Storage capacitor (instead of extra code 020)
Math and logic module
PROFIBUS-DP interface
Universal carrying case TG-35
Stainless steel front with touchpad
2
,... (Order code)
(Order example)
1