General Information; Introduction - Hitachi UTOPIA R32 Series Technical Catalogue

Table of Contents

Advertisement

1 General Information

General information

1.1 General information
© Copyright 2021 Johnson Controls-Hitachi Air Conditioning Spain, S.A.U. – All rights reserved.
No part of this publication may be reproduced, copied, filed or transmitted in any shape or form without the permission of 
Johnson Controls-Hitachi Air Conditioning Spain, S.A.U.
Within the policy of continuous improvement of its products, Johnson Controls-Hitachi Air Conditioning Spain, S.A.U.
reserves the right to make changes at any time without prior notification and without being compelled to introducing them 
into products subsequently sold. This document may therefore have been subject to amendments during the life of the
product.
Hitachi makes every effort to offer correct, up-to-date documentation. Despite this, printing errors cannot be controlled by
Hitachi and are not its responsibility.
As a result, some of the images or data used to illustrate this document may not refer to specific models. No claims will 
be accepted based on the data, illustrations and descriptions included in this manual.
No type of modification must be made to the equipment without prior, written authorization from the manufacturer.
Hitachi pursues a policy of continued improvement in design and performance of Products. The right is therefore
reserved to vary specifications without notice. Hitachi cannot anticipate every possible circumstance that might involve a 
potential hazard. No part of this manual may be reproduced without written permission.

1.1.1 Introduction

Hitachi UTOPIA Prime/ UTOPIA IVX Prime series is an outdoor unit series designed with the goal to cover the
requirements of the split and multisplit systems, for installations where from one indoor unit (single system) to up to 4
indoor units, are connected to the same UTOPIA outdoor unit (depending on model).
New UTOPIA series consists in two different outdoor unit series: UTOPIA Prime and UTOPIA IVX Prime, which compliant
with the Eco Design (ErP) and Energy Labelling (ELD) directives about seasonal energy performance:
•  ErP 206/2012& ELD (626/2011) for models up to 12kW of Cooling capacity
•  ErP 2016/2281 for models higher than 12kW of Cooling capacity
The Seasonal Energy Efficiency Ratio (SEER) in cooling and the Seasonal Coefficient of Performance (SCOP) in 
heating, show an approach values to the real energy consumption.
UTOPIA series incorporate the Hitachi inverter technology, which makes possible to adapt automatically and without the
user operation the capacity of the unit, so the power input, to the real demand of the installation, increasing the system
efficiency to unattainable levels with other technologies. All UTOPIA units are equipped with a heat pump, resulting in 
an air conditioning system valid for the whole year, in which the installation of additional and specific systems are not 
necessary.
Nominal capacity from 7 kW to 14 kW (cooling mode). Connectable indoor units up to 4 units (depending on model) and
total combination power from 90% up to 115% for outdoor units from 4 to 6HP, or 90% up to 100% for 3HP outdoor units.
One of the main merits of Hitachi indoor units range is the combinability and flexibility of its indoor units SYSTEM FREE. 
This outstanding technology makes possible to use the same indoor units with both UTOPIA and SET FREE outdoor 
units, making easier the design, installation and control of the air conditioning installations.
2
TCGB0136 rev.1 - 05/2021

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents