Reactor Removal; 3D Sensor - Whirlpool WFRB1054BHG Service Manual

[键入文字]
B.
Remove the 3 screws that
hold the drive plate and
unplug the rear wire
harness insert. The drive
plate can be removed.
C.
Reactor removal: Remove
2 screws on the driver
board cover to remove the
reactor

16.3D Sensor

A.
After the washing machine
is dumped, the two screws
of the 3D sensor screw are
lowered and the connected
harness plug is removed to
take off the 3D sensor