Liberty Pumps SJ10 Installation Manual
Sumpjet - water powered backup system
Hide thumbs
Also See for SJ10:
- Installation manual (36 pages) ,
- Installation manual (8 pages) ,
- Installation manual (24 pages)
Advertisement
Quick Links
Installation Manual
®
SumpJet
- Water Powered Backup System
MODEL SJ10
No Alarm
MODEL SJ10A
With Alarm
7000 Apple Tree Avenue
Bergen, NY 14416
Phone: (800) 543-2550
Fax: (585) 494-1839
www.libertypumps.com
©Copyright 2014 Liberty Pumps Inc. All rights reserved
IMPORTANT:
Prior to installation, record Model, Serial Number, and
Code Number from pump nameplate for future
reference.
MODEL ________________________
SERIAL ______________________
CODE
______________________
INSTALLATION
DATE
_______________________
5824000G
1
Advertisement
Related Manuals for Liberty Pumps SJ10
Summary of Contents for Liberty Pumps SJ10
- Page 1 Prior to installation, record Model, Serial Number, and Code Number from pump nameplate for future reference. MODEL ________________________ SERIAL ______________________ 7000 Apple Tree Avenue CODE ______________________ Bergen, NY 14416 Phone: (800) 543-2550 INSTALLATION Fax: (585) 494-1839 DATE _______________________ www.libertypumps.com ©Copyright 2014 Liberty Pumps Inc. All rights reserved...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SECTION GENERAL INFORMATION------------------------------------------------------------------------------ 3 SECTION INTRODUCTION-------------------------------------------------------------------------------------------- 4 SECTION MECHANICAL INSTALLATION ----------------------------------------------------------------------- 5-7 SECTION WARRANTY STATEMENT------------------------------------------------------------------------------ 7 SECTION TEMPLATE ------------------------------------------------------------------------------------------------ 9 ©Copyright 2014 Liberty Pumps Inc. All rights reserved... -
Page 3: Section 1 General Information
11.0 12.8 15.4 12.5 17.2 1032 14.5 19.8 1185 1020 15.2 13.5 Note: For optimal performance minimum recommended operating pressure is 30 psi. Use of an RP (RPZ) may lower operating pressure. ©Copyright 2014 Liberty Pumps Inc. All rights reserved... -
Page 4: Section 2 Introduction
STORAGE BEFORE USE Liberty pumps are shipped from the factory ready for installation and use. They should be held in storage if the pump station is not complete. If storage is necessary, the pump should remain in its shipping container. It should be stored in a warehouse or storage shed that has a clean, dry temperature-stable area where the pump and its container should be covered to protect it from water, dirt, dust, etc. -
Page 5: Section 3 Mechanical Installation
To achieve maximum performance from the it is recommended that the unit is plumbed with 3/4” pipe. All water supply piping shall be made of materials and methods approved by the local plumbing codes. ©Copyright 2014 Liberty Pumps Inc. All rights reserved... - Page 6 Determine the length of discharge pipe required to the discharge exit point. Using schedule 40 PVC pipe, glue the discharge pipe SumpJet® into the socket elbow of Complete discharge piping. Discharge piping should be routed to the yard outside the building. ©Copyright 2014 Liberty Pumps Inc. All rights reserved...
-
Page 7: Section 4 Warranty Statement
Liberty Pumps or its authorized service centers, automatically voids warranty. Liberty Pumps, Inc. warrants that pumps of its manufacture are free from all factory defects in material and workmanship for a period of 3 years from the date of purchase. The date of purchase shall be determined by a dated sales receipt noting the model and serial number of the pump. - Page 8 ©Copyright 2014 Liberty Pumps Inc. All rights reserved...
-
Page 9: Section 5 Template
Hole Template Figure 7 ©Copyright 2014 Liberty Pumps Inc. All rights reserved... - Page 10 7000 Apple Tree Avenue Bergen, NY 14416 Phone: (800) 543-2550 Fax: (585) 494-1839 www.libertypumps.com ©Copyright 2014 Liberty Pumps Inc. All rights reserved...