Viking PA-250 Product Manual page 10

C. Quick Programming Features
Description
Mic VOX Control (factory set to 0 = OFF)
Page VOX Control (factory set to 0 = OFF)
Input Priority (1 to 3, 1 = highest) (factory set to 123)
Access Code (factory cleared, blank = Disabled)
Security Code (factory set to 845464)
Page Time Out (0 to 250 seconds, factory set to 0 = Disabled)
VOX Silence Time Out (1 to 9 seconds, factory set to 3)
Telecom Silence Time Out (0 to 9 seconds, factory set to 0 = Disabled)
Chime Tone (1 to 4, factory set to 1 = door chime)
Pre-Page Alert Tone = OFF
Pre-Page Alert Tone = ON (factory setting)
Busy Detect = OFF (factory setting)
Busy Detect = ON
Return to Dial Tone Detection = OFF (factory setting)
Return to Dial Tone Detection = ON
Reset all programming to factory default settings
Exit programming
* Inputs in this order: MIC IN (Microphone Input), PAGE INPUT (Telecom Page Input), AUX INPUT (Auxiliary Input).
NOTE: A double beep indicates a valid memory position, three beeps indicate an error.
D. Mic VOX Control
If a microphone that is connected to the MIC INPUT does not have a Push-to-Talk button, the Mic VOX Control feature
should be enabled (enter 1#42 in programming). When enabled, the PA-250 will trigger microphone paging when mic
audio is detected.
NOTE: Pre-Page Alert Tone will not sound even if enabled.
E. Page VOX Control
If a paging port that is connected to the PAGE INPUT does not provide a contact closure for the PAGE CONTACT
connections, the Page VOX Control feature should be enabled (enter 1#43 in programming). When enabled, the PA-250
will trigger telecom paging when paging port audio is detected.
NOTE: Pre-Page Alert Tone will not sound even if enabled.
Enter Digits
0 or 1
0 or 1
3 digits*
0-6 digits
6 digits
0 to 250
1-9
0-9
1-4
0
Q
1
Q
4
Q
5
Q
6
Q
7
Q
###
#7
10
Memory
+
Location
then #42
then #43
then #44
then #45
then #47
then #48
then #49
then #50
then #51