TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Proximity Card Reader with Built-in Keypad
The model PROX-2 is designed to be mounted directly to standard
single-gang wall box, and integrates both a HID compatible 125KHz
proximity card reader and keypad into a single-unit making it ideal
for applications requiring an access credential and/or personal
identification number (PIN).
The proximity card reader and keypad of the PROX-2 are both
capable of transmitting data in 26-Bit Wiegand format, making it
compatible with any of the Wiegand equipped Viking entry con-
trollers. The keypad is based upon cutting-edge, non-mechanical,
capacitive technology, which, unlike membrane keypads, includes
no moving parts prone to early failure. Advanced keypad enhance-
ments include fully potted circuit board (EWP), keys with blue LED
backlighting, raised key outlines and pip on the 5-key.
The PROX-2 delivers non-contact read ranges up to 6 inches (152
mm), and operates from 5 to 14 VDC. Mounting is simplified with
horizontal and vertical mounting slots, which allow the reader to be
conveniently adjusted and leveled. Concealing the mounting hardware, the PROX-2 ships with both
Black and Ash (Off-White) covers standard.
The PROX-2 is equipped with Enhanced Weather Protection (EWP) for outdoor installations where the
unit is exposed to precipitation or condensation. The PROX-2 features sealed connections, as well as an
epoxy potted circuit board. For more information, see DOD# 859.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Read range of up to 6 inches
• Reader format: 26-bit Wiegand
• Keypad formats: 8-bit burst (default) and 26-bit
Wiegand
• HID compatible
• Designed for outdoor use, the PROX-2 comes
standard with Enhanced Weather Protection
(EWP) (see DOD# 859)
• PROX-2 is designed to meet IP66 Ingress
Protection Rating (see DOD# 859)
• Mounts to a standard single gang electrical box
• Pigtail connection for easy installation
• Red LED shows activity
• Beep tones acknowledge key strokes
• Programmable Facility Code stored in non-volatile
memory (no batteries required)
• Can be mounted directly to a metal surface
P
h
o
n
e
.
.
.
7
1
5
.
3
8
6
P
h
o
n
e
.
.
.
7
1
5
.
3
8
6
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
.
8
8
6
1
.
8
8
6
1
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
A
p
p
l
A
p
p
l
Compatible with these Viking products:
• AES-2000 Accessible Entry System
(see DOD# 202 for more information)
• AES-2005 Accessible Entry System with Video
(see DOD# 204 for more information)
• C-4000 Apartment/Office Entry Controller
(see DOD# 164 for more information)
• ES-1 Stand Alone Keyless Entry System
(see DOD# 193 for more information)
S
p
e
c
S
p
e
c
Power: 5-14V DC, 50mA - average, 115mA peak
Dimensions: 117mm x 77mm x 18mm (4.6" x 3.0" x 0.7")
Shipping weight: 0.11 kg (0.25 lb)
Environmental: -40° C to 65° C (-40° F to 149° F) with up to
100% humidity
Connections: 8" long pigtail leads, 22 gauge
Credential Compatibility: Viking PROXCARD, HID (ProxCard
II, ISO Prox II and ProxTag II)
For additional Specifications, see page 3.
PROX-2
PROX-2
Proximity Card
t
i
c
e
t
i
c
e
Reader with Keypad
E
N
T
U
R
Y
E
N
T
U
R
Y
i
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
July 12, 2011