Alto-Shaam 1000-MR1 Operation And Care Manual page 3

CONTROLS AND INDICATORS
NAME
Thermostat Contact Points
Suction Valve Service Valve
Discharge Valve Service Valve
Power Control Switch Contact Points
( / )
ON OFF
LCD Display
3.3 EXTENDED PERIOD OF INACTIVITY
This unit is designed for continued use at
automatically cycled intervals. In case of an
extended shut-down, the food storage
compartment must be cleaned and wiped dry to
minimize the potential of odor build-up during
shutdown.
29-1/2" (749mm)
WITH BUMPER
26-1/2" (673mm)
POWER
C
2°
P R O C E D U R E S
TYPE FUNCTION
Cycles the refrigeration
system (automatic)
Isolate suction at the
compressor.
Isolate discharge at
the receiver.
Terminates power to
the unit.
Indicates continuous
cabinet temperature.
Ensure the
matches the
21-1/4"
(540mm)
stamped on
FULL
PERIMETER
BUMPER
nameplate
1000-MR1
on l
off o
Operation and Care Manual #8410/11 • 2
START-UP PROCEDURE
O P E R AT I O N
Activate system by inserting
electrical service cord into electrical
supply source. Turn power switch to
the " " position.
ON
With the door closed and the
storage area empty of product, wait
for a period of 1 hour.
Verify correct operating
temperature.
Begin stocking the containment
area when the proper operating
temperature has been reached.
PUSH
HANDLE
24-1/4" (617mm)
length
available
power
source
voltage
unit
.
29-1/2" (749mm)
R E S U LT S
The compressor should immediately
come on-line and the condenser fan
and evaporator fan activate.
The temperature in the storage area
will begin to decrease.
Cabinet will have reached the
proper operating temperature of
36°F ±3°F (2°C, ±1°C).
OUTSIDE DIMENSIONS
27-1/2"
(699mm) (699mm)
1000-MR2
WITH BUMPER
67-1/2" (1714mm)
64-1/2" (1638mm)
on l
POWER
C
2°
off o
27-1/2"
FULL
PERIMETER
BUMPER