Advertisement
Technical background:
The philosophy behind NeuLog's plug and play technology is based on each sensor's
ability to store its own data due to an internal flash memory chip and micro-controller
in each plastic NeuLog body. This technology allows the sensor to collect and then
store the digital data in the correct scientific units (
The sensor is pre-calibrated at the factory. The built-in software in the logger can be
upgraded for free at any time using the provided firmware update.
Inside the NeuLog spirometer sensor's metal tube attachment there is a funnel which
creates a difference of air pressures before and after the funneling piece according to
the airflow speed. A pressure differential sensor is connected to both sides of the
funneling piece.
The sensor's controller calculates accurately the air flow speed according to this
pressure difference.
Area = vital
Using the NeuLog software, you can easily determine the area under or above the
curve to calculate lung volumes and capacities.
o
o
C,
F, Lux, %, ppm, for example).
capacity
NEULOG SPIROMETER LOGGER SENSOR GUIDE
Maintenance and storage:
Never submerge the NeuLog plastic body in any liquid.
Do not allow liquid into the spirometer sensor's body.
After use, gently wipe away any foreign material from the spirometer sensor.
Store in a box at room temperature out of direct sunlight.
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship. The
warranty is for a period of 3 years from the date of purchase and does not cover
damage of the product caused by improper use, abuse, or incorrect storage. Sensors
with a shelf life such as ion selective probes have a warranty of 1 year. Should you
need to act upon the warranty, please contact your distributor. Your sensor will be
repaired or replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W:
www.neulog.com
E:
info@neulog.com
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536
V11042014
Advertisement
