Advertisement
Materials needed:
NUL-216 Spirometer Sensor
Laminated Paper (included)
BAT-200 Battery Module
Materials needed to configure your offline experiment:
USB-200 Module, WIFI-201 module or VIEW-101 Module
USB to mini USB cable (included with the USB-200 module)
Procedure:
Prior to initial use, please review the "Using the spirometer sensor" section of
1.
this document.
2.
To determine the experiment settings, first connect to your chosen device (PC,
Mac, tablet, smart device) and click on the "Off-line experiment" icon after the
sensor search has ended. (For more information on how to change the
experiment settings, view the quick start procedure section for your chosen
device in this document.)
3.
Connect the spirometer sensor directly to the left side of a charged BAT-200
module.
When ready to collect data press the "Start/Stop" button on the spirometer
4.
sensor, a red light will turn on for the duration of the experiment.
After the experiment has concluded (the "Start/Stop" button is pressed again or
5.
the data collection period ends) connect the sensor to your chosen device (you
can find full instructions in each device's quick start procedure section).
6.
Open NeuLog application.
Click the "Off-line experiment" icon.
7.
Click the "Load data from sensors" icon.
8.
9.
Select which experimental data to upload (5 experimental runs can be stored at
one time on the NUL-216 spirometer sensor).
Restoring sensor's factory default settings:
Procedure:
1.
Connect the USB-200 to a PC, Mac, tablet, or smart device.
2.
Connect the spirometer sensor to a USB-200 module (they directly plug
together).
3.
Open the NeuLog application.
Click the "Tools" icon.
4.
Click the "Restore sensor's factory defaults" on the menu.
5.
NEULOG SPIROMETER LOGGER SENSOR GUIDE
Included with the sensor:
NeuLog NUL-216 Spirometer Sensor Guide (this document).
One package of laminated paper for testing.
Sensor's specifications
Range and operation modes
ADC resolution
Resolution
Max sample rate (S/sec)
Experiment Duration: 1 second to 31 days.
Sensor's features:
Fully digital data
Rugged plastic ergonomic case
Push button switch for Start/Stop experiments in off line mode
LED indicator of experiment status (blinks while collecting data)
Pre-calibrated sensing equipment
Metal sensor tube attached by means of 2 durable rubber-coated wires
Two pressure sensors connected to the metal tube to accurately determine airflow
speed
Note: NeuLog products are intended for educational use.
Videos and experiment examples:
Videos, literature and other probes can be found at www.NeuLog.com.
In order to access the spirometer sensor's page, choose "Products" on the main
menu and then "Spirometer logger sensor".
In order to find the science experiments, choose "Experiments" on the main
menu of the NeuLog website, then choose "Physics", "Chemistry", "Biology" or
"Environmental Science".
Biology Experiment:
o
The Lungs and Spirometry Parameters (B-41)
±10 L/s
15 bit
0.2 L/s
100
Advertisement
