Before you start Before you start Check the pack and make sure that you have all parts listed. When you are ready to start, make sure that you have the right tools available, plenty of space and a clean dry and smooth area for installation.
Page 5
If this product contains glass, please take care when fitting or handling to prevent personal injury or damage The hob must not be used for 24 hours after the splashback has been installed Wait 24 hours before removing the protective film...
Care and maintenance Care and maintenance • Clean Stainless Steel using non-corrosive, liquid detergent or a special stainless steel cleaner and avoid the use of abrasive cleaning products. • Clean glass with a damp cloth and mild soap. Dry with a soft clean cloth.
Page 9
Installation NOTE: Ensure walls are level and clean.
Page 10
SILICONE Glass Stainless Steel NOTE: The double sided tape supports the splash back while the silicone adhesive sets.
Page 11
(only on s/steel version) WARNING: The hob must not be used for 24 hours after the splashback has been installed. Note for Glass splashbacks: If installing the glass splash back, then a 2mm gap needs to be left all the way around, so it can expand without pressing against anything which will cause internal stresses.
Page 12
MYAPPLIANCES Unit 3 Normandy Landings, 3 Pope Street NORMANTON West Yorkshire WF6 2AG...
Need help?
Do you have a question about the SPLASHBACK and is the answer not in the manual?
Questions and answers