Table of Contents
Advertisement
5.3 Troubleshooting
Common faults and solutions.
Fault
1
Turn or gripping
function does not start.
3
Rotate and/or gripper is
slow
4
Turn unit sounds bad
when rotating
Other troubles – see the manual for your Lift&Drive trolley.
Contact your dealer or Pronomic AB if the faults cannot be solved using these instructions.
________________________________________________________________________________
Action
A Check the batteries. Voltage should be 24V.
B Check the power connection between the trolley and
the control box.
C Check the motor cable between the turn unit and the
squeeze mast.
A See 1A
A Se chapter maintenance
10 – Squeeze&Turn 19472-19479
Advertisement
Table of Contents
