Configure Wireless Settings With Aoss - Buffalo AirStation Turbo G WHR-HP-G54 Quick Setup Manual

AOSS (AirStation One-Touch Secure System) is a simple system for configuring your
wireless network securely. If your router and your client device are installed and both
support AOSS, then making a secure wireless connection between them is simple. If
your client device doesn't support AOSS or you wish not to set it up, turn to page 5.
A.
Push the AOSS button on your client device and finish the connection. If your
client device is a PC card, CardBus, USB, or PCI adapter, the AOSS button will probably
be in its Client Manager Software. Check your client device's AOSS setup information
for instructions on where to push or click the AOSS button.
B.
You now have two minutes to push the AOSS button on the top of your router and hold it in for a
few seconds. The AOSS light will begin to flash amber.
After you've pressed both buttons, it will take about 30 seconds for the connection to complete. When
it's finished, the AOSS light will glow a solid amber,
without blinking. You now have a secure network
connection!
Note: Only one AOSS wireless client adapter can
be configured with the AOSS router at a time. The
buttons will need to be re-pressed to connect each
additional AOSS wireless client adapter.
Additional non-AOSS wireless devices can be
connected to your wireless network by connecting
them manually. The encryption information is
available in the AirStation Configuration Utility in
the AOSS section. Please consult the User Manual on the AirStation CD-ROM for more information.
Step 3: Configure Wireless Settings (with AOSS)

Standalone PC card
Client Device
AOSS
Client Manager
Software