Navigating The Menu System - Pool Controls Ozone Chemigem User Manual

The Ozone Chemigem Display
Line 1 shows the current time and the mode of operation.
In the example above, line 1, tells you that the time is 3:27pm and the Ozone
Chemigem is operating in "Normal Automatic mode"
Note that the Ozone Chemigem displays the time using a 24-hour clock.
Line 2 shows timer information.
In the example above, line 2 tells you that the "unit is turned ON and will turn
OFF automatically at 21:00 (9pm)"
Line 3 displays ORP (Chlorine) information.
In the example above, line 3 tells you that the current ORP is 670mV with the
unit set to provide 650mV
Line 4 displays pH information.
In the example above, line 4 tells you that the current pH is 7.5 with the unit set
to provide 7.6.
Navigating the Ozone Chemigem Menu System
There are three aspects to the general Ozone Chemigem Menu system – the Timer Menu,
the ORP (Chlorine) Menu and the pH Menu. Access the Ozone Chemigem Menu system
by pressing the ENT button and following the prompts on the LCD. If you find you have
ended up in a part of the Menu system unintentionally, you can return to the Home Screen
by pressing the ESC/OFF button at any time.
Use the Y/UP and N/DOWN buttons to scroll through the various menu options until the
desired option is displayed on the LCD. Use the ENT button to confirm that you wish to
select that option.
Once accessed, use the Y/UP and N/DOWN buttons to adjust operational settings up or
down – and confirm adjustments by pressing ENT. To cancel any adjustments, simply
press ESC/OFF to return to the Home Screen.
Page 10
The D10 uses a four-
line LCD display to
provide the user with
information.