TECHNICAL SPECIFICATIONS ..............7 MACHINE PARTS ..................8 • Obligation to wear suitable personal protection appliances (DPI) LIFE 50-100-130 (VERTICAL) MACHINE PARTS ......... 8 which must be supplied by the employed before starting any ope- rations specified. LIFE 65-115-145 (HORIZONTAL) MACHINE PARTS ......9 LIFE 250 (HORIZONTAL) MACHINE PARTS ........
The appliance may NOT be use for purposes or applications other • VINSERVICE will not held responsible in case of failure to comply with the instructions than the cooling of beverages or food liquids. Beverages or food liquids to cool must NOT for installation.
In case you detect any damage or spoilage, im- mediately stop the operations and contact the Even if VINSERVICE has eliminated, as far as possible, any sharp edges, carrier or the shipping agent and inform VINSER- be advised to sue personal protection devices such as leather gloves, du- VICE at once.
Vinservice will not be held responsible for any loss of profit, excepting in case of specific agreement to the contrary mentioned in the purchase order expressly.
VINSERVICE will not be held responsible for the disposal of the parts or materials that are structions. This appliance MUST NOT be operated by unqualified people, or lacking...
The probe positioned inside the water tank reads the ice bank thickness and regulates formed. Anyway, the stirrer keeps on running and moving the tank and recirculation water the compressor working in order to keep the ice bank constant during running. in the cooling coil, to facilitate the heat exchange (cooling of beverages in the cooling coil and in the dispenser column).
• The compressor runs con- • Thermostat failure • Replace the faulty parts tinuously and does not stop, • Probe (G) failure • Contact Vinservice Custo- causing the beverages to mer Service. freeze • The machine does not • Power supply failure on •...
TECHNICAL SPECIFICATIONS DESCRIPTION OF THE MACHINE The machine is made up of a cooler installed inside a metal casing to protect the movable parts. Identification of machine and manufacturer. • INTENDED USAGE: Identification of machine and manufacturer. The EC plate is to affixed in the The machine is intended to be used for both cooling and dispensing pre-mixed and post- position shown by the following figure.
(F) is • VINSERVICE will not be held responsible for the disposal of packaging materials or working) machine parts or products used for its operation, such as refrigerant gas, compressor • The machine does not •...
GENERAL WIRING DIAGRAM NOTES Caution In Queensland a gas work licence (hydrocarbon refrigerant) is required to undertake gas work on the gas system of a gas device in Queensland that uses fuel gas as a refrigerant such as charging, discharging or breaking MARRONE BROWN into a refrigeration system.
Need help?
Do you have a question about the LIFE 50 and is the answer not in the manual?
Questions and answers