Safety Instructions; Prevention Of Accidents And Residual Risks - Vinservice LIFE 50 Operation And Maintenance Book

Table of Contents

Advertisement

PROFESSIONAL USE ONLY
This device may be operated by children at least 8 years of age and people
with diminished physical, sensory or mental abilities, or even lacking exper-
tise or the necessary operating ability, as long as they are closely watched
or have received instructions relating to the safe use of the device and the
understanding of any relevant dangers. Children must not play with the ap-
pliance. Unattended children must not be entrusted with the cleaning and
maintenance intended for the operator.
This appliance is suitable for residential use or similar uses, such as:
-
Canteens for employees in shops, offices and other workplaces
-
Rural lodges and hotel-motel customers or other residential contexts
-
Bed & breakfast-type environments
-
Catering and similar non-commercial applications

"SAFETY INSTRUCTIONS"

READ THOROUGHLY BEFORE INSTALLING OR USING THE APPLIANCE.
ALWAYS TURN THE APPLIANCE OFF AND DISCONNECT THE POWER CABLE FROM
THE ELECTRICITY OUTLET BEFORE OPENING THE INSPECTION PANEL OR ACCESSING
INSIDE THE CASING ANYWAY.
The cable must be left disconnected until all openings and panels have been repositio-
ned in their original position and the screw-fastened parts re-tightened.
This appliance MUST NOT be operated by unqualified people, or lacking experience in
the use of the same, or not using it in compliance with the instructions of this manual
or of the documents annexed.
This appliance has been designed to cool beverages or food liquids anyway; its featu-
res are duly described in this manual.
PROHIBITED USES
It is expressly prohibited to use the appliance or parts of it in explosive environments. The
appliance must NOT be installed or used in environments saturated with gas or volatile
explosive substances. The appliance may NOT be use for purposes or applications other
than the cooling of beverages or food liquids. Beverages or food liquids to cool must NOT
be highly volatile or inflammable, such as to cause a fire.
Vinservice recommends cleaning the device thoroughly before putting it into service,
using a suitable cleaning product.
After removing the appliance from the packaging, make sure that:
1. The ground or place where the appliance is to be installed has a suitable bearing ca-
pacity or is absolutely even.
2. The appliance is installed far from heat sources, dripping or humidity.
3. The condenser and the ventilation grilles are completely free. We recommend to re-
spect a distance of minimum 30/40 cm around all vents and walls, in order to ensure
suitable air circulation
The appliance must not be installed in an area where water jets or other liquids can be
used.
The appliance must not be placed on a kitchen floor. The appliance must be installed
horizontally.
The appliance must be installed in a place where operation and maintenance are restri-
cted to qualified staff only.
The "overflow" hole must be connected with a suitable water drain BEFORE filling the
tank, by means of a special properly-fixed flexible plastic draining pipe.
IMPORTANT
The electrical appliances must be handled by adopting special precautionary
measures in accordance with their electromagnetic compatibility (EMC).
Make sure to abide by the following direction during installation and opera-
tion of the system.
-

PREVENTION OF ACCIDENTS AND RESIDUAL RISKS

Even if this appliance has been manufactured in full respect of the strictest safety
measures, for obvious reasons it is not possible to foresee all types of installation and
environments where it is installed. Therefore it shall be the customer's responsibility to
advise the manufacturer about special installation conditions.
The instructions provided by this manual do not substitute any safety instructions
and technical specifications for installation and operation. They neither substitute any
common sense rules and safety regulations in force in the country of installation.
The operators must be duly informed of the above. Therefore they must read and
follow all technical instructions provided by this manual and the documents annexed.
Store the technical documents supplied with the equipment carefully.
VINSERVICE will not held responsible in case of failure to comply with the instructions
for installation.
Do not use the machine in case of malfunctions.
The machine has been designed based on the strictest energy saving regulations in
force in the country of manufacturing, therefore the customer shall avoid any useless
waste of energy.
The machine must not be installed outdoor or in unfavourable environmental condi-
tions (exposure to sun, rain, snow, wind, heavy humidity, etc.) Make sure that there are
no electromagnetic interferences.
The machine has not been designed to work in environments subject to danger of fire
or explosion.
It is absolutely forbidden to tamper with and/or deactivate or modify the safety devi-
ces.
The movable panel can be removed only in case of installation, filling or maintenance
operations and the power cable must always be disconnected. On completion of such
operations tighten the screws down again.
IV
maximum allowed impedance of the electric power line is 0.165Ohm
V

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents