Step Two: Place Or Mount The Camera - Lorex W462AQC Series Quick Start Manual

Step Two: Place or mount the camera

You can place the camera on a flat surface or follow the instructions
below to mount it to an indoor ceiling.
1. Use the mounting template to mark two holes for screws.
2. Drill the holes using a
masonry or drywall, gently tap the anchors into the holes.
3. Align the flat side of the mounting plate with the drilled holes.
4. Use a Phillips screwdriver and two screws to secure the
mounting plate to the mounting surface.
5. Twist the camera's base clockwise onto the mounting plate.
6. Open the camera's settings on the app and enable Image
Rotation to flip the camera image.
1/4"
(6mm) drill bit. If mounting to
6