Switching The Headphones Off - Sennheiser CX 120 BT Instruction Manual

Using the headphones
14 | CX 120BT
▷
Press the multi-function button for 2 seconds.
The headphones switch on. You hear the voice prompt "Power on"
and the LED display flashes blue 3x.
If a paired Bluetooth device is within the transmission range, you
hear the voice prompt "Device (1) connected". The LED flashes
blue 3x.
Make sure that Bluetooth is already activated on your Blue-
tooth device when switching on the headphones.
If Bluetooth is activated and the headphones cannot find a
paired Bluetooth device within a few minutes, you hear the
voice prompt "Lost connection". The LED flashes red. The
headphones switch to standby mode.

Switching the headphones off

▷
Press the multi-function button for 4 seconds.
You hear the voice prompt "Power off" and the LED flashes red 3x.
The headphones automatically switch to idle mode if no paired
Bluetooth device can be found within 5 minutes. You can wake
up the headphones from idle mode by pressing the multi-func-
tion button for approx. 3 seconds.
Retrieving information on the battery
charge status
You can check the remaining play and talk time when the head-
phones are in idle mode, are not actively playing music, or are not
used for making calls.
▷
Press the volume -
Voice prompt
"Recharge headset"
"Below 1 hour play time"
"Between 1 and 2 hours
play time"
button/track -.
Meaning
The rechargeable battery is empty.
Recharge the rechargeable battery
9).
In addition, the LED flashes red.
Battery is less than 10% charged. In
addition, the LED flashes red.
Battery is less than 20% charged. In
addition, the LED lights up red.
3x
"Power off"
(>