Error Message Printouts - Brother HL HL-1270N User Manual

Error Message Printouts

The printer will report problems by printing an error message as defined in the following
table. Take the corrective actions for the error message the Printout reports.
Error Message
MEMORY FULL
PRINT OVERRUN
RESOLUTION ADAPTED
(The printer has printed the
document at a reduced
resolution)
Action
Press the panel button to print the data remaining in the
printer.
Reduce the print resolution or reduce the complexity of your
document.
Expand the printer memory by adding a commercially
available SIMM. See "How to add extra Memory" in Chapter
2.
Press the panel button to print the data remaining in the
printer.
If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.
Expand the printer memory by adding a commercially
available SIMM. Refer to "How to add extra Memory" in
Chapter 2. Set page protection to ON by using the supplied
Windows driver or RPC program.
Change the following settings in the supplied Windows driver
and try again. The best combination of settings below will
vary depending on your document.
Graphics Mode
TM
True Type
Use Printer True Type
Reduce the complexity of your document before you print to
prevent automatic reduction in the resolution.
Expand the printer memory by adding a commercially
available SIMM. See "How to add extra Memory" in Chapter
2.
4-8
mode
TM
Fonts