Brother HL HL-1270N User Manual page 14

Network Ready
The Brother printer has built in multi protocol network capability as standard. This allows
multiple host computers to share the printer on a 10/100Mbit Ethernet network. Any user can
print their job as if the printer was directly connected to their computer. Users on Windows
95/98, Windows NT, Unix, Novell, Apple Macintosh, LAN server and OS/2 Warp server
computer can simultaneously access this printer.
For further information, please refer to the 'Network manual' supplied with the printer.
Type/Speed
Protocols
Management
Firmware update
Other Features
10/100Base TX Ethernet
Auto speed detection
TCP/IP
DHCP, BOOTP, RARP, NetBIOS over IP
LPR/LPD, Port9100, Custom Port, POP3/SMTP
SMB Print
TELNET, SNMP, HTTP, TFTP
Novell IPX.SPX (Bindery/NDS)
AppleTalk
Web Based Management
BRAdmin32 Windows based management utility
TELNET and Netware Command Console
SNMP/MIB II
HP JetAdmin/ Web JetAdmin Compatible
2MB FLASH ROM. Use BRAdmin32 when
upgrading print server software or BOOTP, TFTP
PUT/GET or IPX for NETWARE
Windows 95/98 Peer to Peer printing software included as standard.
Brother Card Monitor software included for easy macro/font management.
Brother Internet Print (Printing via Email)
Network Print Configuration button
Password protection for Management Access
Factory reset
Features for providing multiple service creation with
custom setup and rest strings.
1-6