During Each Tour Or Operation Of The System; At The End Of Each Tour - ABS Avalanche Airbag System Instructions For Use Manual

4. Now fold the airbag three
times towards the backpack
ensuring that each fold is
approx. a hand's breadth wide
so that the airbag can easily
unfold.
5. Now push the airbags in the
designated compartments. The
suction and release valve must
be clearly visible on top of the
airbag material.
28
6. Fasten the Velcro closures
of the airbag compartments
tightly.
Step 12
Replace cartridge and activation handle
After every activation the cartridge and the activation handle
must be replaced. Proceed according to step 1, 2 and 4, 5.
The ABS-System is then once again operational.
Proceed now with the practice activation and complete the online
4
form in order to extend the warranty (www.abs-airbag.com under
ABS-System).

4.2 During each tour or operation of the system

Follow steps 1 – 6 of the Initial Operation
1 Checking cartridge weight
2 Attaching cartridge
3 Attaching straps and belts
4 Checking activation handle
5 Attaching activation handle
5
6 Velcro closure
4.3 At the end of the tour
Follow step 8 Removing activation handle of the Initial Operation.
The cartridge can remain attached.
6
English