Snapper HT48 Owner's Manual page 12

OPERATION
STARTING AND STOPPING HEDGE TRIMMER (See Figure 3.)
1. Press the safety lock button (1) into the handle and hold.
2. Squeeze the trigger (2) and the hedge trimmer will turn ON.
3. Release the safety lock button. The hedge trimmer will stay on as long as
the trigger switch is engaged.
4. The hedge trimmer will stop if you release the trigger handle.
IMPORTANT: If the hedge trimmer is accidentally dropped, the hedge trimmer
will turn OFF and the blade will coast to a stop after several seconds. The
hedge trimmer will then be locked OFF again.
1
2
FIG.3
12