Operation; Battery Installation - Vicks VNT275US Owner's Manual

Safety classification of ME EQUIPMENT
Protection against electric
shock
Applied part
Protection against harmful
ingress of water or
particulate matter
Mode of operation
Note: Not intended to be sterilized. Not for use in an OXYGEN RICH ENVIRONMENT
MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC.
For detailed description of EMC requirements please contact Consumer Relations.
Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL
EQUIPMENT.
Remove the battery from the instrument if it is not required for extended periods of time
in order to avoid damage to the thermometer resulting from a leaking battery.

2: Operation

2.1 Battery installation

CAUTION: The Non Contact Infrared Body Thermometer does not operate with dead
batteries and does not input outer power. Install new batteries.
1) Pull the battery door out in the direction of the arrow and then lift up to access
the battery compartment.
2) Insert two AAA size batteries according to the "+" and "-".
3) Close the battery cover.
2.2 How to Operate
Before Applying the Thermometer
Be sure to read and understand all warnings listed on the instructions before use.
• The thermometer should align with the middle of the forehead to measure body
temperature (between and directly above the eyebrows) at a vertical distance.
Press the On (Trigger) button and the temperature will display immediately,
see figure 2.
Figure 2-Measuring position and distance
Internally powered ME equipment
Type BF Applied Part
IP22
Continuous operation
7