Trango Flexcam User Manual page 2

Marking (fig 1)
fig 2 fig 3
Use
1. Never position a Cam at the edge of a crack. (fig 2)
2. Never place a unit so that the cam are offset, e.g.
with two cams extended and cams retracted.( fig 3)
3. Never place a unit where any single cam is near its maximum
extension. ( fig 4)
Regularinspection
Before and after use, be sure your cam have smooth trigger action,
easy cam retraction and expansion, and independent cam motion,
With no signs of damage to sling or cam unit.
Discard the unit if
* The cams or sling have been damaged in a fall.
* The cam teeth are worn away.
* The tailpiece or crossbar is cracked.
* The stem cable are frayed ,kinked, or damaged in any way.
* The springs are weak or damaged.
* The sling or stitching is worn or damaged.
fig 4
UM02-2 (PRINTED 2009. 02)
UM02-2(0)