Optional Accessories; Using The Walking Foot - Brother XL-2230 Operation Manual

OPTIONAL ACCESSORIES

Using the Walking Foot

Stitch Name Pattern
Straight Stitch
(Center
Needle
Position)
Straight Stitch
(Center
Needle
Position)
Zigzag Stitch
Zigzag Stitch
Zigzag (Satin)
Stitch
This foot is very useful for sewing materials such as
vinyl cloth, synthetic leather, and thin leather. etc.
These materials are difficult to feed when sewing.
The walking foot prevents these materials from
crumpling, slipping or sticking between the presser
foot and material.
Note
● Only use the walking foot for straight
sewing (Center Needle Position) and zigzag
stitching. Do not use other patterns.
Switch the machine off.
1
2 Raise the needle and the presser foot.
Stitch Stitch
Length Width
[mm (inch.)] [mm (inch.)]
2.5 (3/32)
–
4.0 (3/16)
1.5 (1/16) 3.0 (1/8)
2.0 (1/16) 5.0 (3/16)
0.5 (1/32) 5.0 (3/16)
3 Loosen the presser foot screw to remove the
presser-foot holder.
2
1
1 Use a screwdriver
2 Presser-foot holder
3 Presser-foot screw
4 Attach the forked section of the connecting
lever to the needle clamp, and fit the walking
foot to the presser bar.
2
3
1 Forked part of operation lever
2 Presser bar holder
3 Needle clamp
3
1
49
5