Brother NX-250 Operation Manual page 58

■ [Example] Selecting stitch
1 Press
select stitch 04.
Select "0" with
select "4" with
To adjust the stitch width, slide the stitch
2
width adjustment slider up or down.
Press the stitch width adjustment button, and
then slide the stitch width adjustment slider to
adjust the stitch width.
1
2
1 Stitch width adjustment slider
2 Stitch width adjustment button
3 Wide
4 Narrow
04
.
(Stitch selection key) to
or on the left, and then
or on the right.
3
4
To adjust the stitch length, slide the stitch
3
length adjustment slider up or down.
Press the stitch length adjustment button, and
then slide the stitch length adjustment slider to
adjust the stitch length.
1
2
1 Stitch length adjustment slider
2 Stitch length adjustment button
3 Long
4 Short
Memo
● When
(Stitch length display key) or
(Stitch width display key) is pressed,
the currently specified stitch length or width
appears in the stitch indicator.
This allows the specified setting to be
checked while it is being changed.
2
1
1 Stitch length display key
2 Stitch width display key
When the stitch length is displayed,
(Stitch length display key) lights up. When
the stitch width is displayed,
width display key) lights up.
● For details on adjusting the stitch width and
length, refer to "Adjusting the Stitch Width
and Length" (page 47).
3
4
(Stitch
Selecting Stitching 57
3