Brother Innov-is 80 Operation Manual page 56

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c After sewing 3 to 5 stitches, press
reinforcement stitch button).
Keep
held down until you reach the beginning of the
stitching.
a Reverse/reinforcement stitch button
While
button) is held down, reverse stitches are
sewn.
d After sewing back to the beginning of the
stitching, release
stitch button).
The machine stops sewing.
e Press
on the foot controller.
The machine starts sewing in the normal
sewing direction
f When the end of the stitching is reached, press
(reverse/reinforcement stitch button).
Keep
held down until 3 to 5 reverse stitches are
sewn.
While
button) is held down, reverse stitches are
sewn.
(reverse/reinforcement stitch button)
(reverse/reinforcement stitch
(reverse/reinforcement
(start/stop button), or press down
(reverse/reinforcement stitch button)
(reverse/reinforcement stitch
(reverse/ g After 3 to 5 reverse stitches have been sewn,
release
button).
The machine stops sewing.
h Press
on the foot controller.
At this time, if
down, the machine sews at a slow speed.
The machine starts sewing in the normal
sewing direction.
i After sewing to the end of the stitching, the
sewing machine stops.
Press
controller.
a Beginning of stitching
b End of stitching
■ Sewing reinforcement stitches
When sewing stitches other than straight or
zigzag stitches that are secured with reverse
stitching, pressing
stitch button) sews reinforcement stitches, 3 to 5
stitches on top of each other.
a Reverse stitching
b Reinforcement stitching
Memo
Whether reverse stitches or reinforcement
stitches are sewn depends on the stitch that
is selected. For details, refer to "Stitch
Settings" (page 120).
(reverse/reinforcement stitch
(start/stop button), or press down
(start/stop button) is held
(start/stop button) or release foot
1
3
1
2
5
4
6
2
(reverse/reinforcement
2
1
2
Sewing 55