Brother Innov-is 80 Operation Manual page 54

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Insert the foot controller plug into its jack on
b
the side of the sewing machine.
a Foot controller jack
Note
(For U.S.A. only)
Foot controller: Model T
This foot controller can be used on this
machine model NS80.
Turn on the sewing machine.
c
Slide the sewing speed controller to the left or
d
right to select the desired sewing speed.
Slide the sewing speed controller to the left to
sew at a slower speed, or slide the speed
controller to the right to sew at a faster speed.
a Sewing speed controller
• The speed set using the sewing speed
controller will be the foot controller's
maximum sewing speed.
Once you are ready to start sewing, slowly
e
press down on the foot controller.
Pressing down on the foot controller increases
the sewing speed; releasing the pressure on the
foot controller decreases the sewing speed.
a Slower
b Faster
• Slowly press down on the foot controller.
Pressing it down hard starts sewing too
quickly.
The machine starts sewing.
When the end of the stitching is reached,
f
completely release the foot controller.
The machine stops sewing with the needle
lowered (in the fabric).
1
2
Sewing 53
2