Axent One User Manual page 16

SETTINGS
12 EN
SYSTE M PU RG E
If the shower toilet has not been used for a prolonged period, all water bearing parts can be
purged with fresh water.
Settings mode is active.
1. Press Lady Wash .
2. The process starts.
3. The system purge process stops automatically after 90 seconds.
4. To stop it before this time, press Stop
E M PT YI N G TH E WATE R TAN K
In the event of service intervention, or before a holiday or prolonged period of no use, the
water tank may need to be emptied.
Settings mode is active.
1. Press Rear Wash .
2. The process starts.
3. The water tank is emptied.
If the wash function is started again, the tank is refilled with water.
.